Vulcan VCRG48-T 48" Core Series Gas Griddle, 1" Steel Plate, 4 Burners, Snap-Action Thermostats, 100,000 BTU
A 48" countertop griddle with a 1" steel plate and a thermostat on every burner.
The Vulcan VCRG48-T is a 48" Core Series countertop gas griddle with a 1" thick polished steel plate, 48" x 24". 4 U-shaped burners at 25,000 BTU/hr each give 100,000 BTU/hr, each with an embedded snap-action thermostat from 200°F to 450°F. It is built for natural gas, and Vulcan packs an LP conversion kit with the unit.
Check the counter or stand: the unit needs 48" of width and 30.5" of depth, plus 6" from combustible walls.
A 48" x 24" plate, 1" thick, welded to 3-1/4" stainless back and side splashes.
One embedded snap-action thermostat per burner holds each 12" zone from 200°F to 450°F.
4 U-shaped aluminized steel burners, one per 12", 100,000 BTU/hr in total.
A stainless steel grease trough drains to a high capacity 4-1/2 quart grease can.
Built for natural gas with a convertible regulator; the LP conversion kit ships with the unit.
One pilot safety valve for every two burners shuts off gas to pilot and burners if a pilot goes out.
Vulcan builds it for natural gas and ships an LP conversion kit with the unit. The conversion is the customer's responsibility, so tell us which gas you have when you order.
1" thick polished steel, 48" wide and 24" deep.
Each snap-action thermostat adjusts from 200°F to 450°F.
6" at the rear and sides from combustible construction, 0" from non-combustible construction, and 4" at the bottom on minimum 4" legs.
Vulcan supplies an elevation orifice kit free of charge for high-elevation use; installation is the customer's responsibility. Tell us your elevation when you order.
Vulcan lists a one year limited parts and labor warranty on the spec sheet.
Specs
| Manufacturer | Vulcan |
|---|---|
| Model Number | VCRG48-T |
| Series | Core Series VCRG-T Thermostatic Restaurant Gas Griddle |
| Shipping Weight | 437 lb. |
| Shipping Dimensions | 53" W x 36" D x 20" H |
| Width | 48 Inches |
| Depth | 30.5 Inches |
| Height | 16 Inches |
| Working Height | 12-1/2 Inches |
| Cooking Surface | 48" W x 24" D |
| Griddle Plate | 1" Thick Polished Steel |
| Splashes | 3-1/4" Stainless Steel Back and Tapered Side Splashes |
| Temperature Range | 200 - 450 Degrees F |
| Control Type | Embedded Mechanical Snap-Action Thermostat per Burner |
| Fuel Type | Natural Gas Standard, LP Conversion Kit Supplied |
| Total BTU | 100,000 BTU/hr |
| Burners | 4 U-Shaped Aluminized Steel Burners, 25,000 BTU/hr Each, One per 12" |
| Gas Connection | 3/4" NPT Rear |
| Gas Pressure | Convertible Regulator SuppliedNatural Gas 4.0" W.C.Propane 10.0" W.C. |
| Ignition | 1 Pilot Safety Valve per 2 Burners |
| Exterior | Stainless Steel Front, Sides and Front Top Ledge |
| Chassis | Fully Welded Stainless and Aluminized Steel |
| Grease Collection | Stainless Steel Grease Trough4-1/2 Quart Grease Can |
| Legs | 4" Adjustable, Minimum 4" Legs Required |
| Clearances | Combustible: Rear and Sides 6", Bottom 4"Non-Combustible: Rear and Sides 0", Bottom 4" |
| Vulcan Options | Elevation Orifice Kit at No Charge |
| Certifications | CSA, NSF |
| Warranty | 1 Year Limited Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
