Hatco HWBRN-43 Drop-In 4/3-Size Uninsulated Heated Well, Fabricator Component, Infinite Control, 1200W, 120/208/240V
A 4/3-size heated well component that lets a fabricator build hot food holding into a custom steam table or serving counter.
The Hatco HWBRN-43 is a drop-in 4/3-size heated well, uninsulated, built as a UR and C-UR recognized fabricator component. It holds four 1/3-size pans, a full-size plus a 1/3-size pan, or other combinations with adapter bars. It is a standard-watt 1200 W well built for 120, 208 or 240V single phase, set when you order. It comes with an infinite switch control with a pilot light on 36" leads, but without conduit or a control box enclosure; the fabricator wires it and must obtain UL approvals for the finished unit.
Leave at least 3-1/2" from the bottom of the well to any combustible surface.
An infinite switch control with a pilot light comes on 36" leads, ready to mount in your counter panel.
Ships without conduit or control box enclosure, so the control can be laid out in your own steam table.
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Thicker stainless steel with solid brazed joints, and easy service access to elements and thermostats.
Non-combustible counter: 12.69" to 12.94" W x 27.69" to 28" D. Combustible counter: 14" to 14.25" W x 29" to 29.25" D with the accessory mounting kit.
1200 W, single phase; 120V: 10.0 A, 208V: 5.8 A, 240V: 5.0 A. Hatco builds the well for one voltage, so order the one you have. The fabricator wires it.
The well uses UL recognized (UR and C-UR) components and ships without conduit or a control box enclosure. The fabricator installs it in a steam table and must obtain UL approvals.
RT means thermostat control with a lit rocker switch and 36" capillary. RN means infinite switch control with a pilot light and 36" leads.
One full-size pan plus one 1/3-size pan, four 1/3-size pans or two 1/2-size pans plus one 1/3-size pan with adapter bars; two 11-quart round pans with an adapter top. Pans and adapters are sold separately.
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBRN-43 |
| Series | Drop-In 4/3-Size UR Components |
| Type | Drop-In 4/3-Size Uninsulated Heated Well, UR Fabricator Component |
| Wattage Class | Standard Watt |
| Shipping Weight | 21 lb. |
| Width | 13.58 Inches |
| Depth | 28.58 Inches |
| Height | 9.34 Inches |
| Countertop Cutout, Non-Combustible | 12.69" to 12.94" W x 27.69" to 28" D |
| Countertop Cutout, Combustible | 14" to 14.25" W x 29" to 29.25" D with the accessory mounting kit |
| Control Panel Cutout | 2.125" W x 3.375" H |
| Capacity | 4/3-Size Opening, 12" x 27" Base |
| Pan Configurations | 4/3-Size Opening, 12" x 27" BaseFull-Size plus 1/3-Size, Four 1/3-Size, or Two 1/2-Size plus One 1/3-Size Pans with Adapter BarsTwo 11 Qt. Round Pans with Adapter Top |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single |
| Wattage | 1200 Watts |
| Amps | 10.0 A at 120V5.8 A at 208V5.0 A at 240V |
| Plug Type | Hardwired |
| Connection | Wired by the FabricatorNo Conduit or Control Box Enclosure Included |
| Control Type | Infinite Switch Control with Pilot Light36" Leads |
| Mounting | Top Mount OnlyEZ Locking Hardware |
| Drain | No Drain |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | UninsulatedStainless and Aluminized Steel HousingMetal-Sheathed Heating ElementSolid Brazed Joints |
| Pan Corners | Round Corners Standard |
| Factory Options | Additional Power Supply Lead Wire in 1' Increments for RN Components |
| Accessories | Stainless Steel Food PansWire TrivetsAdapter for Round PansSupport BarsMounting Kit for Combustible Countertops |
| Certifications | cURus |
| Listing Detail | UR and C-UR Recognized ComponentsConduit and Control Enclosures Not IncludedFabricator Must Obtain UL Approvals |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
