Bakers Pride CH-10 Dante Extra Heavy-Duty 55" Floor Model Gas Charbroiler, 10 Burners, 180,000 BTU
Description
An extra heavy-duty 54.62-inch floor model charbroiler with 10 individually controlled 18,000 BTU burners for high-volume broiling.
The Bakers Pride CH-10 is a Dante CH Series charbroiler built from fully welded, extra heavy-duty plate steel finished in Bakertone paint. 10 burners of 18,000 BTU each, 180,000 BTU per hour in total, sit under stainless steel radiants, and each burner has its own control valve. Cast iron grates are standard and tilt to three positions so you can build cooler zones; floating rod, fish and meat grates are available at no extra charge. Bakers Pride notes the CH can be built in with stone, brick or masonry for exhibition kitchens.
Will it fit · Will it hook up
- Outside size
- 54.62" W x 40.25" D x 44.8" H on 12" legs; depth includes the gas regulator
- Broiling area
- 52-1/2" x 24", 10 grates
- Gas
- Natural gas or LP (choose in the dropdown); 1" NPT rear connection; pressure regulator supplied
- Gas input
- 180,000 BTU/hr (52.74 kW)
- Clearances
- 0" left, right and back; non-combustible locations only, including above grate level
- Shipping
- 900 lb.; carton 60" x 40" x 40.25"
Bakers Pride recommends a 1-1/2" minimum gas supply line for the CH-10, even though the inlet is 1" NPT.
18,000 BTU burners
10 burners at 18,000 BTU each, 180,000 BTU per hour, each with its own control valve and a crossover pilot for easy lighting.
Tilting cast iron grates
Cast iron grates tilt to three positions to create cooler zones. Floating rod, fish or meat grates are available at no extra charge.
Stainless radiants
Heavy-duty V-shaped stainless steel radiants over the burners even out the heat; cast iron radiants and cast iron burners are options.
Plate steel build
Fully welded, extra heavy-duty plate steel with a back splash and Bakertone paint finish.
Lintel shelf and pans
An 8" deep lintel plate shelf runs across the front, with 2" deep stainless steel slide-out grease drawers/water pans below.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Inspect every carton for damage before you sign, and note any damage on the delivery receipt. Report concealed damage to the carrier right away and keep the packing.
- Install the gas pressure regulator supplied with the broiler at the gas inlet. It is set for 5" w.c. manifold pressure on natural gas or 10" w.c. on propane.
- Install only in a non-combustible location, including above grate level, under a ventilation hood. Gas connection must meet local codes or the National Fuel Gas Code ANSI Z223.1.
- A broiler on casters needs a restraint attached to the caster legs and a quick-disconnect gas connection.
- Confirm the leg setup when you order: the 44.8" height assumes 12" legs, and Bakers Pride lists legs and legs with casters as separate kits.
Questions buyers ask
Natural gas or propane?
Both. Choose natural gas or LP in the dropdown. The regulator is set for 5" w.c. natural gas or 10" w.c. propane.
What gas line does it need?
The inlet is a 1" NPT rear connection. Bakers Pride recommends a minimum supply line of 1-1/2" for this model.
How hot can I run it?
All 10 burners at full fire give 180,000 BTU per hour. Bakers Pride suggests a half-hour preheat at maximum heat before you set your zones.
Can I change the grates?
Yes. Cast iron grates are standard, and Bakers Pride offers floating rod, fish and meat grates at no extra charge.
What options are there?
Bakers Pride lists log holders, stainless side splash guards and side panels, heat shields, a work deck with plate shelf, 4" deep water pans, pan cut-outs, and leg or leg-and-caster kits.
What warranty does it have?
Bakers Pride gives a one-year limited warranty from the date of original installation, or up to six months after factory shipment, whichever comes first. Repairs must be done by a Bakers Pride authorized service agency.
Do you match lower prices?
Yes. Bakers Pride equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Bakers Pride |
|---|---|
| Model Number | CH-10 |
| Series | Dante CH Series Extra Heavy-Duty |
| Type | Floor Model Gas Radiant Charbroiler |
| Shipping Weight | 900 lb. |
| Width | 54.62 Inches |
| Depth | 40.25 Inches |
| Height | 44.8 Inches |
| Height Note | Includes 12" LegsDepth Includes Gas Regulator |
| Carton Size | 60" x 40" x 40.25" |
| Required Clearances | 0" Left, Right and BackNon-Combustible Locations Only |
| Broiling Area | 52-1/2" x 24" |
| Burners | 10 at 18,000 BTU Each, Individually Controlled |
| Grates | 10 Cast Iron, 3 Tilting PositionsFloating Rod, Fish or Meat Grates Available |
| Radiants | Stainless Steel, StandardCast Iron Optional |
| Fuel Type | Natural Gas or LP |
| Total BTU | 180,000 BTU/hr |
| kW | 52.74 |
| Gas Connection | 1" NPT RearPressure Regulator Supplied |
| Manifold Pressure | 5" w.c. Natural10" w.c. Propane |
| Construction | Fully Welded Extra Heavy-Duty Plate SteelBakertone PaintBack Splash |
| Front Shelf | 8" Deep Lintel Plate Shelf |
| Grease Drawers | 2" Deep Stainless Steel Slide-Out Grease Drawers/Water Pans |
| Bakers Pride Options | Cast Iron BurnersCast Iron RadiantsLog HoldersSide Splash GuardsSide PanelsHeat ShieldsWork Deck with Plate Shelf4" Water PansPan Cut-OutsLeg SetLegs with Casters |
| Certifications | CSA Certified, CSA Design Certified, NSF |
| Warranty | 1 Year Limited |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

