Bakers Pride F-60RS 60" Dante Floor Model Gas Charbroiler with Cabinet Base, Stainless Steel Radiants, 13 Burners
Description
A 60-inch floor model charbroiler with its own cabinet base, 13 burners and 1,404 sq. in. of grate for steady, high-volume broiling.
The Bakers Pride F-60RS is the 60-inch model of the Dante Series F-RS floor model cabinet-style charbroiler line. It has 13 burners rated 15,000 BTU/hr each for 195,000 BTU/hr in total, under three grid sections of steel floating rod grates. Stainless steel radiants sit over each burner to spread heat and protect the burners from dripping grease. It runs on natural gas or propane, ordered by gas type, through a 3/4 in. NPT rear connection. This listing also offers high output burners, which raise the total to 260,000 BTU/hr.
Will it fit · Will it hook up
- Outside size
- 60" W x 35-1/2" D x 39-3/8" H on 6 in. legs; depth includes the gas regulator
- Gas
- Natural gas or propane, 195,000 BTU/hr (260,000 with high output burners); 3/4" NPT rear connection, 27-1/8" above the floor
- Gas pressure
- Supply 7-8 in. w.c. natural gas or 11-12 in. w.c. propane; supplied regulator sets 4 in. w.c. NG or 10 in. w.c. LP
- Clearances
- 0" to non-combustible construction at the sides and back; non-combustible locations only
- Front aisle
- Allow 31-5/32" in front to pull out the water tub
- Shipping weight
- 900 lb. per Bakers Pride; freight class 70
No electrical hookup is needed. Measure doorways: the smallest outside dimension is the 35-1/2" depth.
13 burners, 195,000 BTU
Each burner is rated 15,000 BTU/hr for 195,000 BTU/hr in total (57.2 kW). High output burners raise it to 260,000 BTU/hr (76.2 kW).
Stainless Steel Radiants
Stainless steel radiants sit over each burner to spread heat and protect the burners from dripping grease.
Tilting floating rod grates
Heavy-duty 1/2" steel floating rod grates cover 1,404 sq. in. Broil in the tilted position so grease runs to the front trough, with less smoke and flare-up.
Crossover pilot lighting
A continuously lit crossover pilot tube lights the burners quickly. A pressure regulator comes with the unit.
Insulated stainless build
Double-walled, fully insulated body with stainless steel exterior, interior and combustion chamber. A 6" stainless work deck, towel bar and slide-out grease drawer/water pan are standard.
Cabinet base storage
The open cabinet base stands on 6" legs with the grate at 34-5/8" above the floor; 6" casters are an option.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- After uncrating, remove the hitch pins that hold the burners in place so the burners can be taken out for weekly cleaning.
- A qualified gas installer must connect it to local code, or the National Fuel Gas Code ANSI Z223.1/NFPA 54 where there is no local code. Install the pressure regulator supplied with the unit before operation.
- Supply pressure must be 7 to 8 in. w.c. for natural gas or 11 to 12 in. w.c. for propane. The unit must be level to perform properly.
- The 6 in. legs are packed in the top section of the broiler. If you add casters, use a connector to ANSI Z21.69 with a quick disconnect and a restraining chain or cable.
Questions buyers ask
What gas does it use, and what pressure?
Natural gas or propane; choose the gas type when you order. Bakers Pride asks for a steady supply of 7 to 8 in. w.c. for natural gas or 11 to 12 in. w.c. for propane. The supplied regulator holds manifold pressure at 4 in. w.c. NG or 10 in. w.c. LP. The connection is 3/4" NPT at the rear.
How much space does it need?
The F-60RS is 60" wide, 35-1/2" deep and 39-3/8" high. Bakers Pride lists 0" clearance to non-combustible construction at the sides and back, and the unit is for non-combustible locations only.
What is the high output burner option?
Standard burners give 195,000 BTU/hr in total. The high output burner choice on this listing raises the total to 260,000 BTU/hr (76.2 kW) on the same 13 burner positions.
What is the difference between RS, RS-R and RS-C?
They share the same body and burners. F-60RS has stainless steel radiants, the standard choice. The -R version uses cast iron radiants and the -C version uses Glo-Stones on a ceramic coal screen.
How long does it take to preheat?
Bakers Pride recommends 3 to 5 minutes of preheat for radiant models, until the grid is hot enough to sear without sticking.
Can it go on casters?
Yes. Bakers Pride offers 6" heavy-duty casters, two with locks. A unit on casters needs a movable-appliance gas connector with a quick disconnect and a restraining chain or cable.
What warranty does it have?
Bakers Pride gives a one-year limited warranty from the date of original installation, or no later than six months after factory shipment. Labor for removable and consumable charbroiler parts such as burners, grates and radiants is not covered.
Do you match lower prices?
Yes. Bakers Pride equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Bakers Pride |
|---|---|
| Model Number | F-60RS |
| Series | Dante Series F-RS Floor Model Cabinet-Style |
| Type | Dante Series F-RS Floor Model Cabinet-Style Gas Charbroiler, Stainless Steel Radiants |
| Part Numbers | 4M-T5SA6RN Natural Gas4M-T5SA6RP Propane |
| Shipping Weight | 900 lb. |
| Shipping Volume | 71.9 cu. ft. |
| Freight Class | 70 |
| Width | 60 Inches |
| Depth | 35-1/2 Inches |
| Height | 39-3/8 Inches |
| Height Note | Includes 6 in. adjustable legsDepth includes gas regulator |
| Grate Height | 34-5/8 in. from floor |
| Legs | 6 in. Adjustable Legs, Standard6 in. Casters Optional |
| Front Aisle Clearance | 31-5/32 in. Water Tub Aisle Clearance |
| Optional Back Shelf Height | 50 in. |
| Fuel Type | Natural Gas or Propane, Ordered by Gas Type |
| Total BTU | 195,000 BTU/hr Standard260,000 BTU/hr High Output |
| Total kW | 57.2 kW Standard76.2 kW High Output |
| Burners | 13 at 15,000 BTU/hr Each, Standard |
| Gas Connection | 3/4 in. NPT Rear, Standard Units1/2 in. NPT on Safety Pilot Units |
| Gas Inlet Height | 27-1/8 in. from floor |
| Supply Pressure | 7-8 in. w.c. Natural Gas11-12 in. w.c. Propane |
| Manifold Pressure | 4 in. w.c. Natural Gas10 in. w.c. Propane |
| Ignition | Continuously Lit Crossover Pilot Tube |
| Broiling Area | 1,404 sq. in. |
| Grids | 3 |
| Grates | 1/2 in. Steel Floating Rod, StandardTiltingCast-Iron or Meat Grates Optional |
| Heat Source | Stainless Steel Radiants |
| Preheat Time | 3-5 Minutes |
| Exterior | Stainless Steel |
| Interior | Stainless Steel Interior and Combustion ChamberDouble-Walled, Fully Insulated |
| Standard Features | 6 in. Stainless Steel Work DeckTowel BarSlide-Out Grease Drawer/Water PanPressure Regulator |
| Control Type | Manual Gas Valves |
| Options and Accessories | Cast-Iron RadiantsGlo-StonesNatural Woodsmoke Essence BoxOverhead Back ShelfSplash Guard48 in. Gas Connector Hose6 in. Casters, Two with Locks10 in. Work Deck for Pan Cut-OutsHigh Output Burners |
| Clearances | 0 in. Left, Right and Back to Non-Combustible ConstructionNon-Combustible Locations Only |
| Certifications | CSA Flame, CSA Star, NSF |
| Warranty | 1 Year Limited |
| Warranty Terms | From Original Installation or up to 6 Months after Factory ShipmentLabor on Burners, Grates and Radiants Not Covered |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

