Description
A Southbend double-deck electric infrared broiler with 24 kW, for high-volume steak service without gas.
The Southbend E-270 is a double-deck electric infrared broiler for steakhouses, hotels and high-volume grills. Ceramic infrared elements draw 24 kW and preheat in about 30 minutes, with no waiting between loads. It runs on 208V or 240V, single or three phase, so kitchens without gas can still broil steaks. Each deck has a 24-1/2" x 28" roll-out grid with five height positions; the front 3" stays cooler for holding finished food.
Will it fit · Will it hook up
- Outside size
- 34" W × 37" D × 75.25" H
- Crate
- 45.5" W × 83" H × 55" D, 932 lbs
- Power
- 24 kW; 208V or 240V, 60 Hz, single or three phase (specify when ordering)
- Amps
- 208V: 94.4 A single phase, 54.5 A per line three phase; 240V: 108.9 A single phase, 62.9 A per line three phase
- Connection
- Your electrician installs the power cord and circuit protection
- Clearances
- 4" sides and 2" back from combustible construction, 0" sides and 2" back from noncombustible (owner's manual, 2024); install under a vented hood
Dimensions and utility data are from Southbend's spec sheet (Form E-170 Rev 2, May 2024). Allow room in front to roll out the grids, and measure the delivery path before ordering.
Electric infrared
Ceramic infrared elements, 24 kW in total (12 kW per deck), for kitchens without gas or where gas is not allowed.
Adjustable roll-out grids
The 24-1/2" x 28" roll-out grid rolls out 17-1/4" and sets at five heights. The front 3" gets less heat for holding.
Two decks
Two independent broiler decks, each with its own controls, double the output in the same 34" footprint.
Made in the USA
Built by Southbend in Fuquay-Varina, NC, with a 1-year parts and labor warranty.
Delivery and setup
- Ships by freight carrier. See our shipping policy for delivery details, and call us for the current lead time.
- Tell us 208V or 240V and single or three phase when you order. Your electrician installs the power cord and circuit protection.
- The broiler ships upright in a crate about 45.5" W x 83" H x 55" D and weighs 932 lbs; plan a liftgate, pallet jack and a clear path.
- Inspect the shipment before signing for it and note any damage on the bill. Report concealed damage to the carrier within 15 days.
- Have a licensed installer connect it and check it under a vented hood before the first service.
Questions buyers ask
What power does it need?
24 kW on 208V or 240V, 60 Hz, single or three phase. At 208V it draws 94.4 A single phase or 54.5 A per line three phase; at 240V 108.9 A or 62.9 A. Your electrician installs the cord and breaker.
How fast does it heat up?
About 30 minutes, per Southbend, with no waiting between loads.
How close can it go to a wall?
4" sides and 2" back from combustible construction, 0" sides and 2" back from noncombustible (owner's manual, 2024). Install it under a vented hood and leave room in front to roll out the grids.
Can it go on casters?
Yes. Casters with locking front wheels and a cable restraint kit are options.
What does the warranty cover?
Southbend covers defects in parts and labor for 1 year from purchase, up to 18 months from the factory sale, serviced by a Southbend Authorized Service Agency. Light bulbs, seals and similar wear parts are limited to 90 days, and damage from improper installation or misuse is not covered.
Specs
| Manufacturer | Southbend |
|---|---|
| Model Number | E-270 |
| Series | Electric Infrared Upright Broiler (Free Standing) |
| Quantity | 1 Each |
| Shipping Weight | 932 lbs (Crated) |
| Crate Size | 45.5" W x 83" H x 55" D |
| Width | 34 Inches |
| Depth | 37 Inches |
| Height | 75.25 Inches |
| Legs | 6" Stainless Steel Adjustable LegsCasters Optional (Front Two Lock) |
| Decks | 2 |
| Broiler Grid | Roll-Out Grid 24-1/2" W x 28" D (Rolls Out 17-1/4")Five Height PositionsFront 3" Is a Reduced-Heat Holding Area |
| Heating Elements | Ceramic Infrared Elements, 24 kW Total (2 Decks x 12 kW) |
| Controls | Separate Controls |
| Total Power | 24 kW |
| Voltage | 208V or 240V, 60 Hz, Single or Three Phase (Specify When Ordering) |
| Amps (208V) | 94.4 A Single Phase54.5 A per Line Three Phase |
| Amps (240V) | 108.9 A Single Phase62.9 A per Line Three Phase |
| Electrical Connection | Power Cord Installed on Site by Your ElectricianCircuit Protection by Owner |
| Preheat | 30 Minutes, No Waiting Between Loads |
| Exterior | 430 Stainless Steel, #3 Polish |
| Interior | 430 Stainless SteelFully Insulated Lining and Burner Boxes |
| Clearances | 4" Sides and 2" Back from Combustible Construction0" Sides and 2" Back from Noncombustible (Owner's Manual, 2024) |
| Ventilation | Install Under a Vented Hood |
| Options | Casters (Front Two Lock)Cable Restraint Kit |
| Certifications | Made in USA (Per Spec Sheet) |
| Warranty | 1 Year Parts and Labor (Southbend Limited Warranty) |
| Usage | Commercial Use Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.