Equipex GL650 UC Leo Under-Counter Induction Warmer for Stone Countertops, 0.65 kW, 120V
Description
An invisible buffet warmer that mounts under a 3/4-inch stone counter and keeps induction chafing dishes hot through the surface.
The Equipex GL650 UC is a Geoline Leo 2 under-counter induction warmer for buffets. It attaches to the underside of a 3/4" (2 cm) natural or engineered stone, concrete or glass countertop, so the counter stays clean and unbroken. Its 7-1/2" coil heats the water in an induction chafing dish to about 190°F. A remote control panel with 20 power levels mounts in the apron on a 5' harness, and an Induc'Mate spacer protects the counter. It runs on 120V, 6 A, with a NEMA 5-15P plug.
Will it fit · Will it hook up
- Warmer size
- 13-3/8" W x 13-3/8" D x 6-5/8" H
- Countertop
- 3/4" (2 cm) natural or engineered stone, concrete or glass
- Subtop cutout
- Recommended plywood subtop cutout 15" x 15"; 6" ventilated clearance below, 2" around the unit
- Edge distance
- 8" from the edge of the warmer to the edge of the countertop structure, plus any edge molding
- Control panel
- 6-3/4" W x 1-1/8" D x 2-1/4" H; apron cutout 6-7/16" W x 1-3/4" H; 5' wire harness
- Power
- 120V, 1-phase, 0.65 kW, 6 A; NEMA 5-15P plug
Keep the warmer 8" in from the counter edge and plan the control panel location in the vertical apron.
Invisible warming
Mounted under the stone, the warmer leaves the buffet top unbroken; guests see only the chafing dish.
Induc'Mate spacer
A 10" x 19-1/4" x 3/8" spacer (can be cut to 10" x 10") keeps the water hot, the counter cool and protects it from scratches. No trivets needed.
Water to about 190°F
Equipex rates it to raise the water in a chafing dish to approximately 190°F.
Remote controls
On/off, +/- and a display with 20 power levels on a panel that mounts in the counter apron.
Stainless frame mount
A stainless steel frame attaches under the counter and the body screws to the frame, so it can be removed for service.
Two cooling fans
Two fans and a removable grease filter keep the electronics cool.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Equipex says shipping damage claims are filed with the carrier, so keep the packaging.
- Installation needs a counter fabricator: the frame attaches to the underside of the stone, the body screws to the frame and the panel mounts in the apron.
- Keep 6" of ventilated space below and 2" around the unit; do not install it in a fully enclosed cabinet.
- Plug it into a grounded 120V outlet on a dedicated circuit; the NEMA 5-15P plug is fitted.
- In the box: warmer, remote control panel with 5' harness and one Induc'Mate countertop spacer.
Questions buyers ask
What countertops does it work with?
Natural or engineered stone, concrete or glass, 3/4" (2 cm) thick.
How hot does it keep food?
Equipex says it raises the water in a chafing dish to approximately 190°F. Always check food temperature with a thermometer to meet health code.
Do I need special chafing dishes?
Use induction-ready chafing dishes. The Induc'Mate spacer goes on the stone above the warmer and only needs to be in the approximate spot; the dish can be centered or a bit off-center.
What outlet does it need?
A grounded 120V receptacle for the NEMA 5-15P plug on a dedicated circuit. It draws 6 A at 650 W.
What is the warranty?
Equipex gives a limited two-year parts and labor warranty on its induction products, counted from shipment by Equipex.
Specs
| Manufacturer | Equipex |
|---|---|
| Model Number | GL650 UC |
| Series | Geoline Leo 2 |
| Type | Under-Counter Induction Warmer, Single Zone |
| Shipping Weight | 18 lb. |
| Width | 13-3/8 Inches |
| Depth | 13-3/8 Inches |
| Height | 6-5/8 Inches |
| Countertop | 3/4" Natural or Engineered Stone, Concrete or Glass |
| Installation | Plywood Subtop Cutout 15" x 15"6" Below2" Around8" from Counter Edge |
| Remote Panel Size | 6-3/4" W x 1-1/8" D x 2-1/4" HCutout 6-7/16" W x 1-3/4" H |
| Voltage | 120 Volts |
| Hertz | 50/60 Hz |
| Phase | 1 |
| Amps | 6 Amps |
| Power | 0.65 kW |
| Plug Type | NEMA 5-15P |
| Coil Size | 7-1/2 Inches |
| Power Levels | 20 |
| Warming | Chafing Dish Water to About 190°F |
| Control Type | Remote Capacitive Touch Panel, 5' Wire HarnessOn/Off, +/-, Display |
| Safety Features | Pan DetectionPower Supply MonitorEmpty Pan SecurityOverheating ProtectionSmall Article Protection |
| Exterior | Stainless Steel Casing and Mounting Frame |
| Cooling | Two Cooling FansRemovable Grease Filter |
| Standard Accessories | Induc'Mate Countertop Spacer 10" x 19-1/4" x 3/8", Field Cut to 10" x 10"Remote Control Panel |
| Certifications | cETLus Listed to UL 197 and CSA C22.2, ETL Sanitation to NSF 4 |
| Warranty | Limited 2 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

